Deploy NextCloudPi (ncp) docker on aarch64 (arm64) board

4 mins to read Hugo Author comment posts

Deploy NextCloudPi(ncp) docker on aarch64 board

在Arm64或aarch64架构的板卡上使用Docker布署NextCloudPi云盘服务

About “arm64 vs aarch64”, just Google it.

 

figure source

Reference:

1. Install ncp with docker:

If you wanna firstly have a taste in LAN network env.:

docker run -d -p 4443:4443 -p 443:443 -p 80:80 -v ncdata:/data --name nextcloudpi ownyourbits/nextcloudpi 127.0.0.1

If you have a domain name:

docker run -d -p 4443:4443 -p 443:443 -p 80:80 -v ncdata:/data --name nextcloudpi ownyourbits/nextcloudpi $YOUR_Domain

2. Some useful commands for work with docker:

We recommend to firstly read all the content below, and pick commands for your need during configuration. The procedures of configuration is roughly as below:

Enter the container:
  docker exec -it <container name> /bin/bash
  docker exec -it 6ef91daa0481 /bin/bash
Set the timeZone same with host:

Note: failing synchronizing the timezone of docker-container and host may lead Authorization Fatal This is a big entraping‼️ 😭

  cp /usr/share/zoneinfo/PRC /etc/localtime
  docker exec -it 6ef91daa0481 date
  docker exec -it 6ef91daa0481 /bin/bash
Install vim for container

You may need to configure config/config.php, but we recommend to use ncp-config as below.

  apt-get update
  apt-get install vim
  vim /var/www/nextcloud/config/config.php
  docker exec -it nextcloudpi ncp-config  #WARNING: note the '_' everywhere in 'ncp-config'!!

ref: https://help.nextcloud.com/t/reset-password-ncp/74207/12

Enlarge the volume for ‘/var/lib/docker’ directory

WARNING: data may get lost. Do this if you have no data in your ncp account. Do it on your own risk. WARNING: data may get lost. Do this if you have no data in your ncp account. Do it on your own risk.

ref: https://forums.docker.com/t/how-to-change-var-lib-docker-directory-with-overlay2/43620/9

  1. make the new folder on the other volume, e.g. you mount your Mess-storage HardDisk /sda1 on /data
  2. stop the docker daemon,
  3. move everything, e.g. cp -avr /var/lib/docker/ /data/lib/
  4. Edit the file /etc/docker/daemon.json and add or modfy the “data-root” entry. If you configuration is empty, the file will look like this:
	{
	  "data-root": "/data/lib/docker"
	}
  1. Stop the docker daemon by systemd stop docker
  2. modify the configuration file for containers: /data/lib/docker/containers//config.vs.json. At the source:, make it into your new path.
  3. start the docker daemon.
  4. Check
    • Check by: # docker info | grep Root && docker ps -a && docker image ls
    • start the docker container If you meet the data-lost error, just change "data-root": "/data/lib/docker" back.

If you meet the error below: Error response from daemon: error evaluating symlinks from mount source “/var/lib/docker/volumes/esdata/_data”: lstat /var/lib/docker: no such file or directory

ref links and modify the configuration of docker container. ref link1: meet error after moving docker root ref link2: change container configuration ref link3: how to format json file in vim

set the frpc for exposing the local service to public Internet
  • Check the port occupation:
  # lsof -i -P -n | grep LISTEN
  docker-pr  9168    root    4u  IPv6 120391      0t0  TCP *:4443 (LISTEN)
  docker-pr  9183    root    4u  IPv6 119704      0t0  TCP *:443 (LISTEN)
  docker-pr  9197    root    4u  IPv6 122113      0t0  TCP *:80 (LISTEN)

  • config frpc: vim /etc/frp/frpc.ini

    If you’re not familiar frp(frps & frpc), learn and be practised about it.

e.g.    
    remote: 8282
    local:  80

  • domain name recored: map cloud.yourdomain.com to the IP of frps’s host.

  • in frps’s host, add host cloud.yourdomain.com to 8282: vim /etc/caddy/Caddyfile

    Caddy 自动https，确实很香啊~！Nginx 的反向代理配置啥的，这里就按下不表了哈~

cloud.yourdomain.com {
      gzip
      log stdout
      proxy / localhost:8282 {  # ncp, frp 8282 - > 80 @ armbian_chanidBox
        websocket
        transparent
      }
}

  • Add the LAN_IP; Domain; 127.0.0.1 into the trust domain list of ncp:

    add the domain cloud.yourdomain.com

    docker exec -it nextcloudpi ncp-config

Start docker container automatically.

You may need the container get started automatically for cases such as interrupted. There are two ways I can find:
- use `docker run -d --restart <flag> <container_name>` when you pull the image and build the container at the first time. [ref link](https://docs.docker.com/config/containers/start-containers-automatically/)
- create a systemd service on host. [ref link](https://blog.container-solutions.com/running-docker-containers-with-systemd)

The example content of /etc/systemd/system/docker.nextcloudpi.service

[Unit]
Description=nextCloudPi Container
After=docker.service
Requires=docker.service
After=frpc.service
Requires=frpc.service     # if you use frpc for exposing the local service to public Internet

[Service]
TimeoutStartSec=30
ExecStart=/usr/bin/docker start nextcloudpi

[Install]
WantedBy=multi-user.target

enable this service run on boot: sudo systemctl enable docker.nextcloudpi.service. Note this .service file may cause fail. test it by reboot your host.

Stop Auto-start container:

  • $ docker update --restart unless-stopped <container_name>, change the unless-stopped into no
  • and modify the /etc/systemd/system/docker.nextcloudpi.service

create new nextCloud user:

NextCloud does not support users to register themselves? Funny…

ref: https://docs.nextcloud.com/server/13/admin_manual/configuration_user/user_configuration.html#creating-a-new-user

Tips:

Different Quota options - configure?

The options for user quotas are “Default”, “Unlimited”, 1GB, 5GB and 10GB. If you’d like to be able to set a 25GB, just type in your own quota in. e.g. 1TB limit just type in “1TB”. ref_link

What http server does ncp use?

try systemctl status apache2 in ncp container’s bash manually stopping the daemon of apache2:

 # systemctl stop apache2
 # systemctl disable apache2

What if install ncp via curl command

We can now install NextCloudPi in any Debian Buster system of any architecture with:

# curl -sSL https://raw.githubusercontent.com/nextcloud/nextcloudpi/master/install.sh | bash

before running above, may need to copy the nc-app and nc-web, ref: https://github.com/nextcloud/nextcloudpi/issues/976 before running above, may need to configure the debian source.list

Published At
comments powered by Disqus